. Bass Booster Provides an acoustically tight seal for superior sound isolation, deep bass sound and tight bass response. One-touch connection (NFC). Electro Bass Booster. 40 mm driver unit reproduces natural and powerful bass. Earpads for delivering direct sound with comfort to the ears. Comfortable head cushion.

Comfortable & stable fit for punchy deep bass. Inward axis structure. Swivels flat for easy portability. USB charging. Headphone cable included for passive operation.

BLUETOOTH ver. 3.0. SBC, AAC and aptX compatible. Approx. 20 hours of play time with 4 hours of charging. Compatible with multi pairing and multi point connections 3 How to Use Getting started Parts and controlsLocation and function of parts. Slider Slide to adjust the length of the headband.

left unit. Built-in antenna The BLUETOOTH antenna is built into the headset. Headband. right unit. N mark. Indicator (blue/red) Lights up in red or blue to indicate the power or communication status of the headset.

POWER button. BASS BOOST indicator (orange) Lights up when the Electro Bass Booster function is turned on. BASS BOOST button Turns on or off the Electro Bass Booster function.

Micro-USB port Connect a computer to this port with the supplied micro-USB cable to charge the headset. INPUT jack Connect a music player, etc. To this jack by using the supplied headphone cable. Make sure that you insert the plug of the music player until it clicks. Otherwise, you may not hear the sound normally. Microphone Picks up the sound of your voice when talking on the phone. Jog switch ( / / / ) Controls various call and playback functions.

VOL (volume) +/- buttons The + button has a tactile dot. 4 How to Use Getting started Parts and controlsBLUETOOTH function indicator. ○: Turns on in blue/●: Turns on in red/-: Turns off. Pairing mode ○ ● ○ ● ○ ● ○ ● ○ ● ○ ●. Connectable ○ -○ -○ -○ -○ -○ -○ -○. Connecting ○ ○ - ○ ○ - ○ ○ - ○ ○ - ○ ○ - ○ ○ - ○ ○.

Connected (HFP/HSP or A2DP) ○ -○ -. Connected (HFP/HSP and A2DP) ○ - ○ -○ - ○ -. Playing music or during a call (HFP/HSP or A2DP) ○ ○ -○ ○ -. Playing music or during a call (HFP/HSP and A2DP) ○ ○ ○ -○ ○ ○ -. Incoming call ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○.

Hint. When the remaining battery charge becomes low, the indicator turns from blue to red, except for pairing mode. 5 How to Use Getting started Supplied accessoriesList of the included items.

Personal Computer with pre-installed with any of the following operating systems and USB port:. When using Windows® Windows® 8.1 / Windows® 8.1 Pro Windows® 8 / Windows® 8 Pro Windows® 7 Home Basic / Home Premium / Professional / Ultimate Windows Vista® (Service Pack 2 or later) Home Basic / Home Premium / Business / Ultimate. When using Mac Mac OS X (version 10.3 or later) Note.

Sony does not guarantee proper operation in all system environments. When using Windows 8.1 update using Windows Update.

7 How to Use Getting started Charging the headsetCharging the headset. Note. The headset cannot be turned on, nor can the BLUETOOTH and Electro Bass Booster functions be used, during charging. If the headset detects a problem while charging due to following causes, the indicator (red) may turn off, although charging is not complete. In this case, charge again within the charging temperature range. If the problem persists, consult your nearest Sony dealer.

Ambient temperature exceeds the charging temperature range of 5 °C – 35 °C (41 °F - 95 °F). There is a problem with the battery. If the headset is not used for a long time, the indicator (red) may not light up when you connect the micro-USB cable to charge the headset. In this case, do not disconnect the micro-USB cable from the headset and wait until the indicator (red) lights up. If the headset is not used for a long time, the battery may be quickly depleted, however, after a few recharges, the battery life will improve. If you store the headset for a long time, charge the battery to its full capacity once every 6 months to avoid over discharge.

Mdr Xb950bt Driver For Macbook

If the headset is not used for a long time, it may take longer to charge the battery. If the life of the built-in rechargeable battery drops significantly, the battery should be replaced. Consult your nearest Sony dealer for replacement of the rechargeable battery. Avoid exposure to temperature extremes, direct sunlight, moisture, sand, dust or mechanical shock. Never leave the headset in a car parked in the sun. If the computer enters into hibernation mode while connected to the headset, charging will not be completed properly.

Check the setting of the computer before charging. The indicator (red) will go off automatically if the computer enters into hibernation mode.

Charge the headset again in this case. Use the supplied micro-USB cable only, and connect directly to a computer. Charging will not be completed properly by an indirect connection, such as via a USB hub. Hint. You can use the headset by connecting the supplied headphone cable, even while charging the headset. If charging starts while the headset is turned on, the headset will turn off automatically.

8 How to Use Getting started Charging the headsetAvailable operating time. Swamp thing nes download for mac. When the battery is almost empty The indicator turns red. When the battery becomes empty, the headset sounds a warning beep and turns off automatically.

When you are using an iPhone, iPad, or iPod touch When the headset is connected to an iPhone, iPad, or iPod touch (iOS 5.0 or later) that supports HFP (Hands-free Profile), it will show an icon that indicates the remaining battery charge of the headset on the screen. Compatible devices iPhone, iPad, or iPod touch (iOS 5.0 or later) supporting Hands-free Profile (HFP) iOS 7.X iOS 5.X / 6.X A: Remaining battery charge of the headset B: High C: Medium D: Low (needs to charge) Note. If you connect the headset to an iPhone, iPad or iPod touch with “ Media audio” (A2DP) only in a multi point connection, the remaining battery charge will not be displayed correctly.

Connecting to a device that does not support one-touch connection (NFC) Pairing with a BLUETOOTH device Pairing is the process required to create a link between BLUETOOTH devices to allow wireless connection. You must pair a device with the headset before you start using the headset.

Connecting the headset to a paired device Once BLUETOOTH devices are paired, there is no need to pair them again. Connect a device already paired by the method that applies for that device.

12 How to Use Making connections One-touch connection (NFC) compatible Android devicesOne-touch connection (NFC) with a smartphone (Android 4.1 or later). By touching the headset with a smartphone, the headset turns on automatically and then pairs and makes a BLUETOOTH connection. Compatible smartphones One-touch connection (NFC) with the following smartphone is shown here. NFC-compatible smartphones with Android 4.1 or later installed NFC NFC (Near Field Communication) is a technology enabling short-range wireless communication between various devices, such as smartphones and IC tags.

Thanks to the NFC function, data communication - for example, BLUETOOTH pairing - can be achieved easily by simply touching NFC-compatible devices together (i.e., at the N Mark symbol or location designated on each device). Confirm that the screen of the smartphone is unlocked. Touch the smartphone on the N marked part of the headset. Keep touching the headset with the smartphone until the smartphone reacts. Refer to the operating instructions of the smartphone for the designated location to be touched on the smartphone. Follow the on-screen instructions to complete the pairing and connection.

When the headset is connected with the smartphone, the blue indicator starts flashing slowly. To disconnect, touch the smartphone again.

To connect a paired smartphone, perform steps 2 and 3. Hint.

If you cannot connect the headset, try the following. Unlock the screen of the smartphone, and move the smartphone slowly over the N marked part of the headset. If the smartphone is in a case, remove the case.

If you touch an NFC-compatible smartphone with the headset, the smartphone terminates BLUETOOTH connection with any current device, and connects to the headset (One-touch connection switching). 13 How to Use Making connections One-touch connection (NFC) compatible Android devicesOne-touch connection (NFC) with a smartphone (Android 2.3.3 or later, and less than Android 4.1).

By touching the headset with a smartphone, the headset turns on automatically and then pairs and makes a BLUETOOTH connection. Compatible smartphones One-touch connection (NFC) with the following smartphone is shown here. NFC-compatible smartphones with Android 2.3.3 or later (excluding Android 3.x). NFC-compatible smartphones with Android 4.1 or less NFC NFC (Near Field Communication) is a technology enabling short-range wireless communication between various devices, such as smartphones and IC tags. Thanks to the NFC function, data communication - for example, BLUETOOTH pairing - can be achieved easily by simply touching NFC-compatible devices together (i.e., at the N Mark symbol or location designated on each device). Confirm that the screen of the smartphone is unlocked. Touch the smartphone on the N marked part of the headset.

Keep touching the headset with the smartphone until the smartphone reacts. Refer to the operating instructions of the smartphone for the designated location to be touched on the smartphone. Follow the on-screen instructions to complete the pairing and connection. When the headset is connected with the smartphone, the blue indicator starts flashing slowly. To disconnect, touch the smartphone again. To connect a paired smartphone, perform steps 4 and 5. Hint.

If you cannot connect the headset, try the following. Start the app “ NFC Easy Connect” on the smartphone, and move the smartphone slowly over the N marked part of the headset. If the smartphone is in a case, remove the case.

Make sure that the app “ NFC Easy Connect” screen is displayed on the smartphone. If you touch an NFC-compatible smartphone with the headset, the smartphone terminates BLUETOOTH connection with any current device, and connects to the headset (One-touch connection switching).

14 How to Use Making connections One-touch connection (NFC) compatible Android devicesDisconnecting the smartphone by one touch (NFC). When the headset is connected with a BLUETOOTH device, if you touch an NFC-compatible smartphone on the headset, the headset is connected with the smartphone that touched on the headset most recently (One-touch connection switching).

However, if you are talking on a BLUETOOTH mobile phone connected to the headset, you cannot switch the BLUETOOTH connection by one touch. When the headset is connected with an NFC-compatible smartphone, if you touch the smartphone on another NFC-compatible BLUETOOTH headset or BLUETOOTH speaker, the smartphone disconnects from the headset, and connects to the BLUETOOTH device it touched. Note. Unlock the screen of the smartphone beforehand. If you installed the app “ NFC Easy Connect” in the smartphone, start the app “ NFC Easy Connect.” 16 How to Use Making connections Android devices not compatible with one-touch connection (NFC)Pairing and connecting with an Android smartphone.

When you pair the headset with a device for the first time after you bought it, or after you initialized the headset (the headset has no pairing information), press and hold the POWER button for about 2 seconds when the headset is turned off. The headset enters pairing mode automatically.

When you pair a 2nd or subsequent device (the headset has pairing information for other devices), press and hold the POWER button for about 7 seconds. Make sure that the indicator flashes blue and red alternately after you release the button. Unlock the screen of the Android smartphone. Search for this headset on the smartphone.

Select Setting - Bluetooth. Touch next to Bluetooth.

Note. If pairing is not established within about 5 minutes, pairing mode will be canceled and the headset will turn off. In this case, start over from step 1. Once BLUETOOTH devices are paired, there is no need to pair them again, except in the following cases:. Pairing information has been deleted after repair, etc.

The headset is already paired with 8 devices and another device is to be paired. The headset can be paired with up to 8 devices. If a new device is paired after 8 devices are already paired, the paired device with the oldest connection time is replaced by the new one. When the pairing information for the headset has been deleted from the BLUETOOTH device.

When the headset is initialized, all pairing information is deleted. The headset can be paired with multiple devices, but can only play music from one paired device at a time. Hint. The above procedure is an example. For details, refer to the operating instructions supplied with your Android smartphone. To delete all pairing information, see “.” 17 How to Use Making connections Android devices not compatible with one-touch connection (NFC)Connecting to a paired Android smartphone.

Hint. The above procedure is an example.

For details, refer to the operating instructions supplied with your smartphone. If the smartphone was connected with the headset the last time, an HFP/HSP connection is made when you turn on the headset. While the headset is on, you can make an A2DP connection (music playback) by pressing the button. Note. If the headset tries to make a connection with a previously connected BLUETOOTH device, you may not be able to connect to the device you want to. If connection fails, terminate the BLUETOOTH connection from the device that was previously connected.

18 How to Use Making connections iPhone (iOS devices)Pairing and connecting with an iPhone. When you pair the headset with a device for the first time after you bought it, or after you initialized the headset (the headset has no pairing information), press and hold the POWER button for about 2 seconds when the headset is turned off. The headset enters pairing mode automatically.

When you pair a 2nd or subsequent device (the headset has pairing information for other devices), press and hold the POWER button for about 7 seconds. Make sure that the indicator flashes blue and red alternately after you release the button. Unlock the screen of the iPhone. Select the BLUETOOTH setting on the iPhone.

Select Settings. Touch Bluetooth. Note. If pairing is not established within about 5 minutes, pairing mode will be canceled and the headset will turn off. In this case, start over from step 1.

Once BLUETOOTH devices are paired, there is no need to pair them again, except in the following cases:. Pairing information has been deleted after repair, etc. The headset is already paired with 8 devices and another device is to be paired. The headset can be paired with up to 8 devices.

If a new device is paired after 8 devices are already paired, the paired device with the oldest connection time is replaced by the new one. When the pairing information for the headset has been deleted from the BLUETOOTH device. When the headset is initialized, all pairing information is deleted. If the pairing information was deleted by initializing the headset, etc., delete from your iPhone the pairing information for the headset, and then pair them again. The headset can be paired with multiple devices, but can only play music from one paired device at a time. Hint. The above procedure is an example.

For details, refer to the operating instructions supplied with your iPhone. To delete all pairing information, see “.” 19 How to Use Making connections iPhone (iOS devices)Connecting to a paired iPhone.

Hint. The above procedure is an example. For details, refer to the operating instructions supplied with your iPhone. If the iPhone was connected with the headset the last time, an HFP/HSP connection is made when you turn on the headset.

While the headset is on, you can make an A2DP connection (music playback) by pressing the button. Note.

If the headset tries to make a connection with a previously connected BLUETOOTH device, you may not be able to connect to the device you want to. If connection fails, terminate the BLUETOOTH connection from the device that was previously connected.

20 How to Use Making connections Other BLUETOOTH devicesPairing and connecting with other BLUETOOTH devices. When you pair the headset with a device for the first time after you bought it, or after you initialized the headset (the headset has no pairing information), press and hold the POWER button for about 2 seconds when the headset is turned off. The headset enters pairing mode automatically. When you pair a 2nd or subsequent device (the headset has pairing information for other devices), press and hold the POWER button for about 7 seconds.

Make sure that the indicator flashes blue and red alternately after you release the button. Perform the pairing procedure on the BLUETOOTH device to search for this headset. Note. If pairing is not established within about 5 minutes, pairing mode will be canceled and the headset will turn off. In this case, start over from step 1. When pairing with a BLUETOOTH device that cannot display a list of detected devices or that has no display, you may pair the device by setting both the headset and the BLUETOOTH device to pairing mode. At this time, if passkey is set other than “0000” on the BLUETOOTH device, pairing cannot be done with the headset.

Once BLUETOOTH devices are paired, there is no need to pair them again, except in the following cases:. Pairing information has been deleted after repair, etc. The headset is already paired with 8 devices and another device is to be paired. The headset can be paired with up to 8 devices. If a new device is paired after 8 devices are already paired, the paired device with the oldest connection time is replaced by the new one.

When the pairing information for the headset has been deleted from the BLUETOOTH device. When the headset is initialized, all pairing information is deleted. The headset can be paired with multiple devices, but can only play music from one paired device at a time. Hint. The above procedure is an example. For details, refer to the operating instructions supplied with your BLUETOOTH device. To delete all pairing information, see “.” 21 How to Use Making connections Other BLUETOOTH devicesConnecting to a paired BLUETOOTH device.

Hint. The above procedure is an example. For details, refer to the operating instructions supplied with your BLUETOOTH device. If the BLUETOOTH device was connected with the headset the last time, an HFP/HSP connection is made when you turn on the headset. While the headset is on, you can make an A2DP connection (music playback) by pressing the button.

Note. If the headset tries to make a connection with a previously connected BLUETOOTH device, you may not be able to connect to the device you want to. If connection fails, terminate the BLUETOOTH connection from the device that was previously connected.

22 How to Use Making connections Multi point connectionConnecting the headset to both a music player and a smartphone or mobile phone. Note.

If the smartphone or mobile phone was connected with the headset the last time, an HFP or HSP connection is made automatically when you turn on the headset. At the same time, an A2DP connection may also be made automatically. If this happens, disconnect the headset from the smartphone or mobile phone once using the phone, then connect the devices again by repeating the process from step 2. 23 How to Use Making connections Multi point connectionConnecting the headset to 2 Android smartphones.

Note. Make sure you connect the L-shaped plug to the playback device. Use the supplied headphone cable only. Make sure you insert the plug firmly. The BLUETOOTH and Electro Bass Booster functions cannot be used. The jog switch ( / / / ) and VOL +/- buttons cannot be used.

Hint. When an incoming call arrives, a ring tone will be heard via the headphones. Answer the call using your smartphone or mobile phone, and talk using the microphone of the phone. You can hear the voice of the caller from the headphones. If you disconnect the headphone cable from the smartphone or mobile phone, you can talk using the microphone and speaker of the phone.

26 How to Use Listening to music Listening to music via a BLUETOOTH connectionListening to music from a device connected via BLUETOOTH. You can enjoy listening to music and basic remote control operation of a BLUETOOTH device via a BLUETOOTH connection. The BLUETOOTH device is required to support the following BLUETOOTH profiles.

A2DP (Advanced Audio Distribution Profile): enables you to enjoy high-quality audio content wirelessly. AVRCP (Audio Video Remote Control Profile): enables you to adjust volume, etc. The operation may vary depending on the BLUETOOTH device. Refer to the operating instructions supplied with your BLUETOOTH device. Note. If the communication condition is poor, the BLUETOOTH device may react incorrectly to the operation on the headset. Hint.

The headset supports SCMS-T content protection. You can enjoy music, etc., from a device such as a mobile phone or portable TV that supports SCMS-T content protection. Depending on the BLUETOOTH device, it may be necessary to adjust the volume or set the audio output setting on the BLUETOOTH device. 27 How to Use Listening to music Listening to music via a BLUETOOTH connectionControlling the audio device (BLUETOOTH connection). Note. Since the function amplifies certain low frequencies, the effect may not be obtained with music that does not contain the frequencies to be amplified.

The indicator turns on or off when the Electro Bass Booster function is turned on or off. However, no operation sounds are emitted. The on or off status of the Electro Bass Booster function remains and will be the same when you turn on the headset next time.

31 How to Use Listening to music Sound quality modeSwitching the sound quality mode. If you turn on the headset while holding the VOL+ button down, a mode with more priority placed on sound quality is selected.

It switches from “Priority on stable connection” mode to “Standard” mode. It switches from “Standard” mode to “Priority on sound quality” mode. If you turn on the headset while holding the VOL- button down, a mode with more priority placed on communications is selected.

It switches from “Priority on sound quality” mode to “Standard” mode. It switches from “Standard” mode to “Priority on stable connection” mode. Note. When you turn on the headset by pressing the POWER button only, the headset does not indicate the sound quality mode with flashes of the indicator (blue). The playback time may become shorter, depending on the sound quality and the conditions under which you are using the headset.

Depending on the ambient conditions in the area where you are using the headset, intermittent sound may still occur, even if the “Priority on stable connection” mode is selected. 32 How to Use Listening to music Sound quality modeChecking the sound quality mode. When the sound quality mode is switched, the headset indicates the remaining battery charge by flashing the indicator in red first, and then in blue to indicate the sound quality mode. You can check the current sound quality mode by the number of flashes of the indicator (blue). To check the current sound quality mode when the unit is turned on, hold the POWER button down and press the VOL+ or VOL- button within about 2 seconds (before the headset turns off).

The current sound quality mode will be shown by the number of flashes of the indicator (blue). You can enjoy a hands-free call with a smartphone or mobile phone that supports the BLUETOOTH profile HFP (Hands-free Profile) or HSP (Headset Profile), via a BLUETOOTH connection. If your smartphone or mobile phone supports both HFP and HSP, set it to HFP.

Operations may vary depending on the smartphone or mobile phone. Refer to the operating instructions supplied with your smartphone or mobile phone. Ring tone When an incoming call arrives, a ring tone will be heard from the headset. The ring tone varies in the following ways, depending on your smartphone or mobile phone. Ring tone set on the headset. Ring tone set on the smartphone or mobile phone.

Ring tone set on the smartphone or mobile phone only for a BLUETOOTH connection. When an incoming call arrives even while you are listening to music, playback pauses and a ring tone will be heard from the headset. If no ring tone is heard via the headset. The headset may not be connected with the smartphone or mobile phone with HFP or HSP. Check the connection status on the smartphone or mobile phone.

If playback does not pause automatically, operate the headset to pause playback. Press the VOL+ or VOL- button to adjust the volume. To end the call, press the (call) button on the headset again. Note.

Depending on the smartphone or mobile phone, playback may not resume automatically even if you finish the call. Use a smartphone or mobile phone at least 50 cm (19 3/4 in.) away from the headset. Noise may result if the headset and the smartphone or mobile phone are too close. Hint. Some smartphones or mobile phones have handset use priority when receiving a call.

In the case of the HFP or HSP connection, switch the call device to the headset by holding the (call) button down for about 2 seconds or by using your smartphone or mobile phone. If you adjust the volume on the headset when not talking, the playback volume is adjusted. Volume for a call and listening to music can be adjusted independently.

Even if you change the volume while playing back music, the volume of a call does not change. 34 How to Use Making phone calls Making phone callsMaking a call. Note. Use a smartphone or mobile phone at least 50 cm (19 3/4 in.) away from the headset.

Noise may result if the headset and the smartphone or mobile phone are too close. Hint. If you adjust the volume on the headset when not talking, the playback volume is adjusted. Volume for a call and listening to music can be adjusted independently. Even if you change the volume while playing back music, the volume of a call does not change. 35 How to Use Making phone calls Making phone callsButton functions for a phone call. Others.

Do not place this headset in a place exposed to humidity, dust, soot or steam, subject to direct sunlight, or in a car waiting at a traffic signal. It may cause a malfunction. Using the BLUETOOTH device may not function on mobile phones, depending on radio wave conditions and location where the device is being used. If you experience discomfort after using the BLUETOOTH device, stop using the BLUETOOTH device immediately. Should any problem persist, consult your nearest Sony dealer. Listening with this headset at high volume may affect your hearing. For traffic safety, do not use this headset while driving or cycling.

Do not put weight or pressure on this headset as it may cause the headset to deform during long storage. Do not subject the headset to excessive shock.

Clean the headset with a soft dry cloth. Do not expose the headset to water. The headset is not waterproof. Remember to follow the precautions below. Be careful not to drop the headset into a sink or other container filled with water. Do not use the headset in humid locations or bad weather, such as in the rain or snow.

Do not get the headset wet. If you touch the headset with wet hands, or put the headset in a damp article of clothing, the headset may get wet and this may cause a malfunction of the headset. If you have any questions or problems concerning this headset that are not covered in this manual, please consult your nearest Sony dealer.

38 How to Use Important information PrecautionsWhat is BLUETOOTH wireless technology? BLUETOOTH wireless technology is a short-range wireless technology that enables wireless data communication between digital devices, such as a computer and digital camera.

BLUETOOTH wireless technology operates within a range of about 10 m (30 feet). Connecting two devices as necessary is common, but some devices can be connected to multiple devices at the same time. You do not need to use a cable for connection, nor is it necessary for the devices to face one another, such is the case with infrared technology. For example, you can use such a device in a bag or pocket. BLUETOOTH standard is an international standard supported by thousands of companies all over the world, and employed by various companies worldwide.

Communication system and compatible BLUETOOTH profiles of the unit Profile is standardization of the function for each BLUETOOTH device specification. The unit supports the following BLUETOOTH version and profiles: Communication system: BLUETOOTH Specification Ver. 3.0 Compatible BLUETOOTH profiles:. A2DP (Advanced Audio Distribution Profile): Transmitting or receiving audio content of high-quality. AVRCP (Audio Video Remote Control Profile): Controlling A/V equipment; pausing, stopping, starting playback, etc. HSP (Headset Profile)(.): Talking on the phone/Operating the phone.

HFP (Hands-free Profile)(.): Talking on the phone/Operating the phone by hands-free. When you use a BLUETOOTH mobile phone supported by both HFP (Hands-free Profile) and HSP (Headset Profile), set it to HFP. Note. To be able to use the BLUETOOTH function, the BLUETOOTH device to be connected requires the same profile as this unit. Note also that even if the same profile exists, devices may vary in function depending on their specifications. Due to the characteristic of BLUETOOTH wireless technology, the sound played on this unit is slightly delayed from the sound played on the BLUETOOTH device during talking on the telephone or listening to the music. This unit supports security capabilities that comply with the BLUETOOTH standard to provide a secure connection when the BLUETOOTH wireless technology is used, but security may not be enough depending on the setting.

Be careful when communicating using BLUETOOTH wireless technology. We do not take any responsibility for the leakage of information during BLUETOOTH communication. A device featuring the BLUETOOTH function is required to conform to the BLUETOOTH standard specified by Bluetooth SIG, Inc. And be authenticated. Even if the connected device conforms to the above mentioned BLUETOOTH standard, some devices may not be connected or work correctly, depending on the features or specifications of the device. Noise or sound skips may occur depending on the BLUETOOTH device connected with this unit, the communication environment or the usage environment. 39 How to Use Important information TrademarksTrademarks.

The BLUETOOTH word mark and logos are owned by the Bluetooth SIG, Inc. And any use of such marks by Sony Corporation is under license. The N Mark is a trademark or registered trademark of NFC Forum, Inc.

In the United States and in other countries. Android and Google Play are trademarks of Google Inc. iPad, iPhone, iPod touch are trademarks of Apple Inc., registered in the U.S. And other countries.

Microsoft, Windows and Windows Vista are registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Mac and Mac OS are trademarks of Apple Inc., registered in the U.S. And other countries. The aptX® mark and the aptX logo are trade marks of CSR plc or one of its group companies and may be registered in one or more jurisdictions. If the headset does not function as expected, try the following steps to resolve the issue. Find the symptoms of the issue in this Help Guide, and try any corrective actions listed.

Connect the headset to a computer to charge the battery. You may be able to resolve some issues by charging the battery. Reset the headset. Initialize the headset. This operation resets volume settings, etc., and deletes all pairing information.

Look up information on the issue on the customer support website. Location of the serial number label A: Serial number label B: Earpad To attach the earpads. Align the projection in the groove on the main part with the notch on the earpad.

Place your finger at the notch, and then press and move your finger around the skirt of the earpad once to mount the skirt to the groove on the main part. Note. Be careful not to catch any foreign objects between the main part and the earpad. Keep metal objects away as they may stick to the speakers in the headset. 42 Troubleshooting Troubleshooting PowerThe headset is not turned on. The micro-USB cable is not connected properly to the USB port of the computer. Connect the micro-USB cable again.

Check that the headset and the computer are directly connected, not via a USB hub. A problem may have occurred with the connected USB port of the computer.

Connect to another USB port if it is available. Try the USB connection procedure again in cases other than those stated above. 46 Troubleshooting Troubleshooting ChargingThe remaining battery charge of the headset is not displayed on the screen of an iPhone, iPad, or iPod touch. Check that both the headset and the connected device are turned on. An A2DP BLUETOOTH connection is not made between the headset and the BLUETOOTH device. Use the BLUETOOTH device and make an A2DP BLUETOOTH connection.

Sony Mdr Xb950bt Replacement Parts

Turn up the volume of the headset and the connected device. Check that the connected device is playing back. If you are connecting a computer to the headset, make sure the audio output setting of the computer is set for a BLUETOOTH device.

Pair the headset and the BLUETOOTH device again. Check that the headphone cable is connected firmly. 48 Troubleshooting Troubleshooting SoundLow sound level. Turn down the volume of the connected device. Keep the headset away from a microwave oven, Wi-Fi, etc. Bring the headset and the BLUETOOTH device closer together.

Remove any obstacles between the headset and the BLUETOOTH device. Keep the headset away from a TV. Switch the BLUETOOTH connection to A2DP by operating the BLUETOOTH device when HFP or HSP is set. If you connect a device with a built-in radio or tuner to the headset, broadcasts may not be received, or sensitivity may be reduced. Locate the headset farther away from the device and check that you can listen to the broadcasts satisfactorily. If you have previously connected the headset to this BLUETOOTH device, only an HFP/HSP BLUETOOTH connection may be made when the headset is turned on.

If this happens, use the BLUETOOTH device and make an A2DP BLUETOOTH connection. When you listen to music from a computer on the headset, sound quality may be poor for the first few seconds after a connection is made. This is caused by the computer transmitting music at sound quality for communications at first, and it is not a malfunction. If the sound quality does not improve after a few seconds, press the headset's POWER button once or operate the computer to make an A2DP connection.

50 Troubleshooting Troubleshooting SoundSound skips frequently during playback. Set the headset to the “Priority on stable connection” mode. For details, refer to '.'

. Remove any obstacles between the antenna of the BLUETOOTH device to be connected and the built-in antenna of the headset. The antenna of the headset is built into the part shown in the dotted line below. A: Location of the built-in antenna. BLUETOOTH communications may be disabled, or noise or audio dropout may occur under the following conditions.

There is a human body between the headset and the BLUETOOTH device. This situation may be improved by placing the BLUETOOTH device facing the antenna of the headset.

There is an obstacle, such as metal or wall, between the headset and the BLUETOOTH device. A device using 2.4 GHz frequency, such as a Wi-Fi device, cordless telephone, or microwave oven, is in use near this headset. 51 Troubleshooting Troubleshooting PairingPairing cannot be done.

Mdr Xb950bt Parts

Bring the headset and the BLUETOOTH device within 1 m (3 feet) from each other. When you turn on the headset for the first time after purchasing, initializing, or repairing it, the headset enters pairing mode automatically. Pair the headset with a BLUETOOTH device. When you want to pair a 2nd or subsequent device, press and hold the POWER button of the headset for about 7 seconds to enter pairing mode.

When you pair the headset with devices again after initializing or repairing the headset, information for pairing with the headset remaining on the iPhone or other device may prevent you from pairing them successfully. In this case, delete the pairing information of the headset from the device, and then pair them again.

52 Troubleshooting Troubleshooting One-touch connection (NFC)Unable to connect the headset to a BLUETOOTH device with one-touch connection (NFC). Keep the smartphone close to the headset until the smartphone reacts. If you fail to connect, move the smartphone slowly on the N Mark of the headset. Check that the NFC function of the smartphone is set to on.

If the smartphone is in a case, remove it. NFC reception sensitivity varies depending on the device. If you repeatedly fail to connect the headset with a smartphone by one touch, connect it to the headset by on-screen operation on the smartphone. You cannot make a one-touch connection (NFC) while charging the battery because the headset cannot be turned on. Finish charging first, and then make the one-touch connection (NFC).

You cannot make a one-touch connection (NFC) when the headphone cable is connected to the INPUT jack. Remove the headphone cable from the headset.

53 Troubleshooting Troubleshooting BLUETOOTH connectionUnable to make a BLUETOOTH connection. Remove any obstacles between the antenna of the BLUETOOTH device to be connected and the built-in antenna of the headset. The antenna of the headset is built into the part shown in the dotted line below. A: Location of the built-in antenna.

BLUETOOTH communications may be disabled, or noise or audio dropout may occur under the following conditions. There is a human body between the headset and the BLUETOOTH device. This situation may be improved by placing the BLUETOOTH device facing the antenna of the headset. There is an obstacle, such as metal or wall, between the headset and the BLUETOOTH device.

A device using 2.4 GHz frequency, such as a Wi-Fi device, cordless telephone, or microwave oven, is in use near this headset. 56 Troubleshooting Troubleshooting BLUETOOTH connectionThe headset does not operate properly.

Apple Footer. This site contains user submitted content, comments and opinions and is for informational purposes only. Apple may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Apple can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums.

Apple disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the.